Abrasive Disc Mandrel, 1/8 in Shank

114-402.jpg

Product Description

A shank with a screw-like head. Used primarily with Dremel polishing bits and accessories. This provides plenty of shank for the collect or chuck to hold onto. Simply remove the screw, line up a cut-off wheel or sanding band over the hole in the shank and replace and tighten the screw.

Specifications

Height [Nom] 1-1/4 in
Length [Nom] 1/4 in
Shank Diam [Nom] 1/8 in
Speed [Max] 35,000 rpm
Type Mandrel
Width [Nom] 1/4 in
Wt. 0.01 lb

Recommended Products

Recently Viewed